University home
University in Finnish
For Foreign Students
Faculties and Departments
University Library

Research
Materials engineering
Process development
Applications and products
Facilities
Equipment list
Publications
Dissertations
Projects
University of Oulu,
Department of Electrical and Information Engineering,
Microelecrtronics and Materials Physics laboratories
P.O.Box 4500
FIN-90014 University of Oulu
Finland
tel. +358 8 5532710
fax. +358 8 5532728
2012 PUBLICATIONS
PAPERS
Sahu P., Hamada A.S., Sahu T., Puustinen J.,
Oittinen T., and Karjalainen L.P.,
Kumar N., Mäki-Arvela P., Yläsalmi T., Villegas J., Heikkilä T., Leino A.-R., Kordas K., Salmi T., and Murzin D.Y., Dimerization of 1-butene in liquid phase reaction: Influence of structure, pore size and acidity of Beta zeolite and MCM-41 mesoporous material, Microporous and mesoporous materials 147(1): 127-134 DOI: 10.1016/j.micromeso.2011.05.032 (2012).
2011 PUBLICATIONS
PAPERS
Mäklin J., Halonen N., Toth G., Sapi A., Kukovecz A., Konya Z., Jantunen H., Mikkola, J.-P., and Kordas K., Thermal diffusivity of aligned multi-walled carbon nanotubes measured by the flash method, Physica status solidi b - basic solid state physics 248(11): 2508-2511, DOI: 10.1002/pssb.201100143 (2011).
Halonen N., Sapi A., Nagy L., Puskas R., Leino A.-R., Mäklin J., Kukkola J., Toth G., Wu M.-C., Liao H.-C., Su W.-F., Shchukarev A., Mikkola J.-P., Kukovecz A., Konya Z., and Kordas K., Low-temperature growth of multi-walled carbon nanotubes by thermal CVD, Physica status solidi b - basic solid state physics 248(11): 2500-2503, DOI: 10.1002/pssb.201100137 (2011).
Putaala J., Nousiainen O., Komulainen M., Kangasvieri T., Jantunen H., and Moilanen M., Influence of Thermal-Cycling-Induced Failures on the RF Performance of Ceramic Antenna Assemblies, IEEE Transactions on components, packaging and manufacturing technology 1(9): 1465-1472, DOI: 10.1109/TCPMT (2011).
Pertsev N., and Tyunina M., Interfacial nanolayers
and permittivity of ferroelectric superlattices,
J. Appl. Phys. 109(12): 126101 (2011).
Myllymäki S., Huttunen A, Palukuru V.K., Jantunen H., Berg M.E., and Salonen E.T., Feasibility study of antenna integrated capacitive sensor in operational mobile phone, Progress In Electromagnetics Research C 23: 219-231 (2011).
Rajesh S.,
Murali
K.P., Jantunen, H., and Ratheesh, R.,
Shah S., Rajesh S., Srusti B., M. Bandyopadhyay, Rotti C., Singh M.J., Roopesh G., Chakraborty A.K., Schunke B., Hemsworth R., and Chareyre J., Design optimization of the 100 kV HV bushing for ITER-DNB, Fusion Engineering and Design 86(6-8): 892-895 (2011).
Kusema B.T.,
Campo B.C., Simakova O.A., Leino A.-R., Kordas K., Mäki-Arvela P., Salmi T., and Murzin D.Y., Selective Oxidation of D-Galactose over Gold Catalysts, ChemCatChem 3: 1789 – 1798, DOI: 10.1002/cctc.201100183 (2011).
Putaala J., Salmela O., Nousiainen O., Kangasvieri T., and Uusimäki A., Lifetime prediction of non-collapsible solder joints in LTCC/PWB assemblies using a recalibrated Engelmaier's model, IEEE Transactions on Components, Packaging, and Manufacturing Technology, DOI: 0.1109/TCPMT.2011.2177090 (2011).
Kumar, N., Mäki-Arvela P.), Yläsalmi T., Villegas J., Heikkila T. Leino A.-R., Kordas K., Salmi T., and Murzin D.Y., 1Dimerization of 1-butene in liquid phase reaction: Influence of structure, pore size and acidity of Beta zeolite and MCM-41 mesoporous material, Microporous and mesoporous materials 147(1):127-134 (2011).
Madsen A.T., Rozmyslowicz B., Simakova I.L., Kilpiö T., Leino A.-R., Kordas K., Eränen K., Mäki-Arvela P., and Murzin D.Y., Step Changes and Deactivation Behavior in the Continuous Decarboxylation of Stearic Acid, Industrial&Engineering chemistry research 50(19): 11049-11058 (2011).
Aitola K., Halme J., Halonen N., Kaskela A., Toivola M., Nasibulin A.G., Kordas K., Toth G., Kauppinen, E.I., and Lund P.D., Comparison of dye solar cell counter electrodes based on different carbon nanostructures, Thin solid films 519(22): 8125-8134 (2011).
Simakova O.A., Murzina E.V., Mäki-Arvela P., Leino A.R., Campo B.C., Kordas K., Willfor S.M., Salmi T., anad Murzin D.Y., Oxidative dehydrogenation of a biomass derived lignan - Hydroxymatairesinol over heterogeneous gold catalysts, Journal of catalysis 282(1): 54-64 (2011).
Hsi C.H., Chen M.Y., Jantunen H., Hsu F.-C., and Lin T.-C., Sintering of titanate based dielectrics doped with lithium fluoride and calcium borosilicate glass, Materials Science-Poland 29(1): 29-34 (2011).
Palukuru V.K., Sonoda K., Pynttäri V., Hu T., Mäkinen, R., Mäntysalo, M., Hagberg, J., and Jantunen, H., Inkjet-Printed RF Structures on BST-Polymer Composites: An Application of a Monopole Antenna for 2.4 GHz Wireless Local Area Network Operation, International Journal of Applied Ceramic Technology 8(4): 940-946 (2011).
Joseph T., Sebastian M.T., Jantunen H., Jacob M., and Sreemoolanadhan H., Tape Casting and Dielectric Properties of Sr(2)ZnSi(2)O(7)-Based Ceramic-Glass Composite for Low-Temperature Co-fired Ceramics Applications, International Journal of Applied Ceramic Technology 8(4): 854-864 (2011).
Heinilehto S, Lappalainen J., Jantunen H., and Lantto V., IR-wavelength optical shutter based on ITO/VO(2)/ITO thin film stack, Journal of Electroceramics 27(1): 7-12 (2011).
Sonoda K, Teirikangas M, Juuti J, Moriya Y, and Jantunen H, Effect of surface modification on dielectric and magnetic properties of metal powder/polymer nanocomposites, Journal of Magnetism and Magnetic Materials 323(17): 2281-2286 (2011).
Wu M.-C., Hiltunen J., Sapi A., Avila A., Larsson W., Liao H.-C., Huuhtanen M., Toth G., Shchukarev A., Laufer N., Kukovecz A., Konya Z., Mikkola J.-P., Keiski R., Su W.-F., Chen Y.-F., Jantunen H., Ajayan P.M., Vajtai R., and Kordas K., Nitrogen-Doped Anatase Nanofibers Decorated with Noble Metal Nanoparticles for Photocatalytic Production of Hydrogen, ACS Nano DOI: 10.1021/nn201111j (2011).
Mohl M., Dobo D., Kukovecz A. Konya Z., Kordas K., Wei J.Q. Vajtai R. Ajayan P.M., Formation of CuPd and CuPt Bimetallic Nanotubes by Galvanic Replacement Reaction, Journal of Physical Chemistry C 115(19): 9403-9409 (2011).
Nousiainen O., Salmela O., Putaala J., and Kangasvieri T., Enhanced thermal fatigue endurance and lifetime prediction of lead-free LGA joints in LTCC modules, Soldering & Surface Mount Technology DOI: 10.1108/09540911111120177 (2011).
Wu M.C. , Sapi A., Avila A., Szabo M., Hiltunen J., Huuhtanen M., Toth G., Kukovecz A., Konya Z., Keiski R., Su W.F., Jantunen H., and Kordas K., Enhanced photocatalytic activity of TiO2 nanofibers and their flexible composite films: Decomposition of organic dyes and efficient H2 generation from ethanol-water mixtures, Nano Research 4(4): 360-369 (2011).
Herrera V.A.S., Oladele O., Kordas K., Eränen K., Mikkola J.P., Murzin D.Y., Salmi T., Sugar hydrogenation over a Ru/C catalyst, Journal of Chemical Technology and Biotechnology 86(5): 658-668 (2011).
Kirilin A., Maki-Arvela P., Kordas K., Leino A.-R., Shchukarev A., Bostrom D., Mikkola J.-P., Kustov L.M., Salmi T.O., and Murzin D.Y., Chemo-Bio Catalyzed Synthesis of R-1-Phenylethyl Acetate over Bimetallic PdZn Catalysts, Lipase, and Ru/Al2O3. Part I, Kinetics and catalysis 52(1): 72-76 (2011).
Myllymäki S., Valkonen R., Holopainen J., Huttunen A., Palukuru V.K., Berg M., Jantunen H., and Salonen E., Capacitive-Sensor-Induced Losses in 900-, 1800-, and 1900-MHz Antennas, IEEE Antennas and Wireless Propagation Letters 10: 330-333 (2011).
Teirikangas M., Juuti J., and Jantunen H., Progress In Electromagnetics Research, Organic-Inorganic RF Composites with Enhanced Permittivity by Nanoparticle Additions, Progress In Electromagnetics Research 115: 147-157 (2011).
Myllymäki S., Huttunen A., Jantunen H., Berg M., and Salonen E.T., Measurement Method for Sensitivity Analysis of Proximity Sensor and Sensor Antenna Integration in a Handheld Device, Progress In Electromagnetics Research C 20, 255-268 (2011).
Tyunina M., Oja, R., Plekh M., and Nieminen, R.M., Dielectric properties of NaNbO3: SrTiO3 interface nanolayer, Journal of Applied Physics 109(1): Art. Nr: 014103 (2011).
Kirilin A., Sahin S., Tokarev A., Maki-Arvela P., Kordas K., Leino A.-R., Shchukarev A., Mikkola J.-P., Kustov L.M., Salmi T., Murzin D.Y., Mechanistic investigations of the reaction network in chemo-bio catalyzed synthesis of R-1-phenylethyl acetate, Kinetics and catalysis 51(6): 809-815 (2010 ).
Sobocinski M., Leinonen M., Juuti J., and Jantunen H., Monomorph piezoelectric wideband energy harvester integrated into LTCC, Journal of the European Ceramic Society 31(5): 789-794 (2011).
Ajaikumar S., Ahlkvist J., Larsson W., Shchukarev A., Leino A.-R., Kordas K., and Mikkola J.-P., Oxidation of alpha-pinene over gold containing bimetallic nanoparticles supported on reducible TiO2 by deposition-precipitation method, Applied Catalysis A-General 392(1-2): 11-18 (2011).
Simakova O.A., Kusema B.T., Campo B.C., Leino A.-R., Kordas K., Pitchon V., Mäki-Arvela P., and Murzin D.Y., Structure Sensitivity in L-Arabinose Oxidation over Au/Al2O3 Catalysts, Journal of Physical Chemistry C 115(4): 1036-1043 (2011).
Wang M., Hiltunen J., Uusitalo S., Puustinen J., Lappalainen J., Karioja P., and Myllylä R., Fabrication of optical inverted-rib waveguides using UV-imprinting, Microelectronic Engineering 88(2): 175-178 (2011).
PAPERS
Valant M., Dunne
L., Axelsson A.-K., Alford N.M., Manos G., Peräntie J., Hagberg
J., Jantunen H., and Dabkowski A., Electrocaloric
effect in a ferroelectric Pb(Zn1/3Nb2/3)O3-PbTiO3
single crystal, Physical Review B 81, 214110 (2010).
Tyunina M., Narkilahti J., Plekh M., Oja R., Nieminen R. M., Dejneka A., and Trepakov V., Evidence for strain-induced ferroelectric order in epitaxial thin-film KTaO3, Physical Review Letters 104, 227601 (1-4) (2010).
Tyunina M., Levoska J., Nuzhnyy D., and
Kamba S., Enhanced relaxor behavior in epitaxial PbMg1/3Nb2/3O3
films, Physical Review B 81, 132105 (1-4) (2010).
Tyunina M., Jaakola J., Plekh M., and Levoska J., Nanoscale engineering of ferroelectric functionality, Journal of Electroceramics 24, 15-19.(2010).
Teirikangas M.,
Juuti J., and Jantunen H., Layered dielectric–magnetic
composite structures for Rf-applications, Composite Structures 93,
179-183 (2010).
Stenlund L., Riski K., Seppä J., Pudas M., Vähäsöyrinki M., Tuhkanen, and V., Röning J., Traceable characterization of a bending millimetre scale cantilever for nanoforce sensing, Meas.Sci. Technol. 21,075102 (9pp) (2010).
Sowpati A.K., Palukuru V.K.,
Pynttäri V., Mäkinen R., Kartikeyan M.V. , and Jantunen H.,
Performance of printable antennas with different
conductor thicknesses, Progress In Electromagnetics Research Letters
13, 59-65 (2010).
Sonoda K., Juuti J., Moriya Y., and
Jantunen H., Modification of the dielectric
properties of 0-3 ceramic-polymer composites by introducing surface active
agents onto the ceramic filler surface, Composite Structures
92, 1052-1058 (2010).
Sonoda K.,
Hu T., Juuti J., Moriya Y., and Jantunen H., Fabrication
and properties of composites from BST and
polypropylene-graft-poly(styrene-stat-divinylbenzene), Journal of the
European Ceramic Society 30, 381-384 (2010).
Sobocinski M., Zwierz R., Juuti J.,
Jantunen H., and Golonka L., Electrical and
electromechanical characteristics of LTCC embedded piezoelectric bulk
actuators, Advances in Applied Ceramics 109(3): 135-138
(2010).
Simakova O.A.,
Sobolev V.I., Koltunov K.Y. , Campo B., Leino A.R., Kordas K., and Murzin
D.Y., "Double-Peak" Catalytic Activity of Nanosized
Gold Supported on Titania in Gas-Phase Selective Oxidation of Ethanol,
ChemCatChem 2(12): 1535-1538 (2010).
Seelam P.K.,
Huuhtanen M.,
Sápi
A.,
Szabó M.,
Kordás
K.,
Turpeinen E.,
Tóth G., and
Keiski R.L.,
CNT-based catalysts for H2 production by ethanol reforming,
International Journal of Hydrogen Energy 35, 12588-12598
(2010).
Sebastian M.T., and Jantunen H.,
Polymer–Ceramic Composites of 0–3 Connectivity for
Circuits in Electronics: A Review, International Journal of Applied
Ceramic Technology 7, 415-434 (2010).
Reinik J., Heinmaa I., Mikkola
J.-P., Kordas K., and Kirso U., Synthesis of calcium-alumino-silicate
hydrates from oil shale ash in different alkaline media, Oil Shale
27, 47–57 (2010)/ DOI: 10.3176/oil.2010.1.06.
Pynttari V.J., Mäkinen R.M., Palukuru
V.K., Östman K., Sillanpää H.P., Kanerva T., Lepistö T., Hagberg J., and
Jantunen H., Application of Wide-Band Material
Characterization Methods to Printable Electronics, IEEE Transactions
on Electronics Packaging Manufacturing 33, 221-227 (2010).
Puustinen, J., Lappalainen, J. ,Hiltunen,
J., Lantto, V., and Jantunen, H.,
Orientation Dependend Dielectric
Characteristics of Nanocrystalline
Pb(ZrxTi1-x)O3
Films with Inter Digital
Electrodes,
Ferroelectrics 405, 227-235 (2010).
Plekh M., Narkilahti J., Levoska J., and Tyunina M., Polydomain configuration in epitaxial Pb0.5Sr0.5TiO3/La0.5Sr0.5CoO3 heterostructures, Applied Physics Letters 97, 202909 (1-3) (2010 )
Plekh M., and Tyunina M.,
Ferroelectric domains in epitaxial PbZr0.65Ti0.35O3/La0.5Sr0.5CoO3
heterostructures, Applied Physics Letters 97, 062902 (1-3)
(2010).
Peräntie J.,
Hagberg J., Uusimäki A., and Jantunen H.,
Electric-field-induced dielectric and temperature changes in a
<011> -
oriented Pb(Mg1/3Nb2/3)O3-PbTiO3
single crystal, Phys. Rev. B 82, 134119 [8 pages] (2010).
Palukuru V.K., Sonoda K., Rajesh S., and Jantunen H., BST_COC composite based rectangular DI-electric resonator antenna (DRA) for 2.4 wlan wrist applications, Progress In Electromagnetics Research C 16, 195-205, 2010.
Palukuru V.K.,
Sonoda K., Hagberg J., and Jantunen H., BST-Polymer
Composite-Based Planar Inverted-F (PIFA) Chip Antenna for 2.4 GHz Wrist
Applications, Integrated Ferroelectrics 114, 17-24 (2010).
Palukuru V.K.,
Peräntie J., Komulainen M., Tick T., and Jantunen H.,
Tunable microwave devices using low-sintering-temperature screen-printed
barium strontium titanate (BST) thick films, Journal of the European
Ceramic Society 30, 389-394 (2010).
Palosaari J., Juuti J., Heinonen E.,
Moilanen V-P., and Jantunen H., Non-uniform electric
field in poling of structurally graded monolithic piezoactuator,
Journal of Electroceramics, DOI 10.1007/s10832-010-9609-4 (2010).
Nousiainen,
O.,Kangasvieri, T., Kautio, K., Rautioaho, R., and Vähäkangas, J.,
Effect of ENIG deposition on the failure
mechanisms of thermomechanically loaded lead-free 2nd level interconnections
in LTCC/PWB assemblies, Soldering &
Surface Mount Technology
22(3): 22-35.
Nelo M., Sowpati A.K., Palukuru V.K.,
Juuti J., and Jantunen H., Formulation of screen
printable cobalt nanoparticle ink for high frequency applications,
Progress In Electromagnetics Research 110, 253-266
(2010).
Myllymäki S.,
Huttunen A., Palukuru V.K., Jantunen H., Berg M., and Salonen E.,
Capacitive Recognition of the User's Hand Grip
Position in Mobile Handsets, Progress In Electromagnetics Research B
22, 203-220 (2010).
Myllymäki S.,
Dual-dome micromechanical resonator fabricated with reactive ion etching and
plasma-enhanced chemical vapor deposition techniques, Journal of
Micro/Nanolithography, MEMS, and MOEMS 9, 023012 (2010).
Molnar D., Heszler P., Mingesz R.,
Gingl Z., Kukovecz A., Konya Z., Haspel H., Mohl M., Sapi A., Kiricsi I.,
Kordas K., Mäklin J., Halonen N., Toth G., Moilanen H. Roth S., Vajtai R.,
Ajayan P.M., Pouillon Y., and Rubio A., Increasing
chemical selectivity of carbon nanotube-based sensors by fluctuation
enhanced sensing, Fluctuation and Noise Letters 9(3):
277-287 (2010).
Mohl M.,
Pusztai P.J.,
Kukovecz A.,
Konya Z., Kukkola J., Kordas K., Vajtai R., and Ajayan
P.M.,
Low-Temperature Large-Scale Synthesis and Electrical Testing of Ultralong
Copper Nanowires,
Langmuir 26(21):
16496-16502 (2010).
Mäki-Arvela P., Murzina E.V., Campo B.,
Heikkilä T., Leino A.-R., Kordás K., Wolf D., Tokarev A.V., and Murzin D.Y.,
The effect of palladium dispersion and promoters on
lactose oxidation kinetics, Research on Chemical Intermediates 36,
423-442 (2010).
Lappalainen, J.,
Puustinen, J. ,Hiltunen, J., Lantto, V., and Jantunen, H.,
Low-Temperature Amorphous-Like Pb(ZrxTi1-x)O3
for Optical Wave guiding Applications,
Ferroelectrics 405, 211-219 (2010).
Lappalainen J., Puustinen J., Hiltunen
J., and Lantto V., Pulsed-laser deposited
amorphous-like PZT thin-films: Microstructure and optical properties,
Journal of the European Ceramic Society 30, 497-502 (2010).
Kukovecz A., Molnár D., Kordás
K., Gingl Z., Moilanen H., Mingesz R., Kónya Z., Mäklin J., Halonen
N., Tóth G., Haspel H., Heszler P., Mohl M., Sápi A., Roth
S., Vajtai R., Ajayan P.M., Pouillon Y., Rubio A., and Kiricsi I., Carbon
nanotube based sensors and fluctuation enhanced sensing, Phys.
Status Solidi (C) 7, 1217– 1221 (2010) / DOI 10.1002/pssc.200982973.
Kukkola J., Rautio A., Sala G., Pino
F., Tóth G., Leino A.-R., Mäklin J., Jantunen H., Uusimäki A., Kordás K.,
Gracia E., Terrones M., Shchukarev A., and Mikkola J.-P.,
Electrical transport through single-wall carbon
nanotube–anodic aluminum oxide–aluminum heterostructures,
Nanotechnology 21, 035707 (2010).
Koskela P., Teirikangas M., Alastalo
A., Forsman J., Juuti J., Tapper U., Auvinen A., Seppä H., Jantunen H., and
Jokiniemi J., Synthesis of cobalt nanoparticles to
enhance magnetic permeability of metal–polymer composites,
Advanced Powder Technology,
doi:10.1016/j.apt.2010.09.010
(2010).
Kirilin, A., Mäki-Arvela P., Rupp M., Toukoniitty E., Kumar N., Kordas K., Kustov L.M., Salmi T., and Murzin D.Y., Mechanism of the chemo–bio catalyzed cascade synthesis of R-1-phenylethyl acetate over Pd/Al2O3, lipase, and Ru-catalysts, Res. Chem. Intermed. 36, 193–210 (2010) / DOI 10.1007/s11164-010-0129-2.
Juuti J., Teirikangas M., Sonoda K.,
and Jantunen H., Thermoplastic 0–3 Ceramic–Polymer
Composites With Adjustable Magnetic and Dielectric Characteristics for Radio
Frequency Applications, International Journal of Applied Ceramic
Technology 7, 452-460 (2010).
Jacob M.V., Thomas S., Sebastian M.T., Honkamo J., and Jantunen H., Frequency and Temperature Dependent Dielectric Properties of Greentapes, Journal of the Australian Ceramics Society 46, 36-40 (2010).
Huttunen A., Myllymäki S., Komulainen
M., and Jantunen H., Capacitive Sensor Arrangement to
Detect External Load on a Mobile Terminal Antenna, Progress In
Electromagnetics Research Letters 15, 13-18 (2010).
Heinonen E., Juuti J., Palosaari J.,
Tyholdt F., Jantunen H., Østbø N.P., Vogl A., Poppe E.,
Guðbjörnsson S., Ringaard E., Hök B., Fägerman
P.-E, Gløersen P., and Ræder H., High performance thin
film PZT ultrasonic transducer by CSD for distance measurements in water,
Journal of Electroceramics DOI 10.1007/s10832-010-9610-y (2010).
Hannu J.,
Saikkonen T., Häkkinen J., Karttunen J., and Moilanen M.,
Enabling Remote Testing: Embedded Test Controller and
Mixed-signal Test Architecture, Journal of
Electronic Testing 26, 641-658
(2010)/ DOI 10.1007/s10836-010-5175-6.
Hannu J., Juuti J., and Jantunen H.,
Recent Patents on Piezoelectric Energy Harvester
Transducer Structures, Recent Patents on Electrical Engineering 3,
19-24 (2010).
Halonen N., Rautio A., Leino A.-R.,
Kyllönen T., Tóth G., Lappalainen J., Kordás K., Huuhtanen M., Keiski
R.L., Sápi A., Szabó M. , Kukovecz A., Kónya Z., Kiricsi I., Ajayan P.M.,
and Vajtai R., Three-Dimensional Carbon Nanotube
Scaffolds as Particulate Filters and Catalyst Support Membranes, ACS
Nano (2010) / DOI: 10.1021/nn100150x
Gracia-Espino E., Sala G., Pino F.,
Halonen N., Luomahaara J., Mäklin J., Tóth G., Kordás K., Jantunen H.,
Terrones M., Helistö P., Seppä H., Ajayan P. M., and Vajtai R.,
Electrical Transport and Field-Effect Transistors
Using Inkjet-Printed SWCNT Films Having Different Functional Side Groups,
ACS Nano 4, 3318-3324 (2010).
Eta V., Mäki-Arvela P., Leino A.R.,
Kordas K., Salmi T., Murzin D.Y., and Mikkola J.P. ta V., Mäki-Arvela P.,
Leino A.R., Kordas K., Salmi T., Murzin D.Y., and Mikkola J.P.,
Synthesis of Dimethyl Carbonate from Methanol and
Carbon Dioxide: Circumventing Thermodynamic Limitations, Industrial &
Engineering Chemistry Research, 49(20): 9609-9617 (2010).
Eta V.,
Mäki-Arvela P., Kordas K., Murzin DY., Salmi T, and Mikkola J.-P.,
The Activity
of Zirconia and Other Metal Oxides in the Synthesis of Dimethyl Carbonate
from Methanol and Carbon Dioxide, in Progress in Heterogeneous Catalysis,
ed. by Marmaduke DL, Nova Science Publishers Inc., New York, pp. 135 –
156 (2009).
Dombovari A. , Halonen N.,
Sapi A., Szabo M., Toth G., Mäklin J., Kordas K., Juuti
J., Jantunen H., Kukovecz A., and Konya Z.,
Moderate anisotropy in the electrical conductivity of bulk MWCNT/epoxy
composites, Carbon 48, 1918-1925 (2010).
Dejneka A., Tyunina M., Narkilahti J.,
Levoska J., Chvostova D., Jastrabik .L, and Trepakov V.A.,
Tensile strain induced changes in the optical spectra
of SrTiO3 epitaxial thin films, Physics of the Solid
State 52(10): 2082-2089 (2010).
Bernas H., Eränen K., Simakova I.,
Leino A.-R., Kordás K., Myllyoja J., Mäki-Arvela P., Salmi T., and Murzin
D.Y., Deoxygenation of dodecanoic acid under inert
atmosphere, Fuel 89, 2033–2039 (2010).
Alasaarela T., Saastamoinen T., Hiltunen J., Säynätjoki A., Tervonen A., Stenberg P., Kuittinen M., and Honkanen S., Atomic layer deposited titanium dioxide and its application in resonant waveguide grating, Applied Optics 49(22): 4321-4325.
PAPERS
Nousiainen O., Kangasvieri T., Rautioaho, R., Vähäkangas J., Thermal fatigue endurance of lead-free composite solder joints over a temperature range of - 55 °C - 150 °C, Journal of Electronic Materials 38, 843 - 851 (2009).
Suutala A., Olkkonen J., Cox D.C., Lappalainen J., and Jantunen H.,
Inverted method for fabricating a nano-aperture device with subwavelength
structures,
Journal of Vcuum Science & Technology B
27,
2457-2461
(2009)
Eta
V., Mäki-Arvela P., Kordas K., Murzin D.Y., Salmi T., and Mikkola J.-P.,
The Activity of Zirconia and Other Metal Oxides in the Synthesis of Dimethyl
Carbonate from Methanol and Carbon Dioxide,
in Progress in Heterogeneous Catalysis, ed. by Marmaduke DL, Nova Science
Publishers Inc., New York, pp. 135 – 156 (2009).
Myllymäki S., Huttunen A., Berg M., Komulainen M., and Jantunen H.,
Method for measuring user-induced load on mobile
terminal
antenna,
Electronics Letters 45, 1065-1066
(2009).
Teirikangas M., Juuti J., and Jantunen H.,
Multilayer BST-COC Composite with Enhanced High Frequency Dielectric
Properties,
Ferroelectrics 387, 210-215 (2009).
Palukuru V.K., Pekonen A., Pynttäri V., Mäkinen R., Hagberg J., and Jantunen
H., An inkjet-printed
inverted-F antenna for 2.4-GHz wrist applications,
Microwave and optical technology letters 51, 2936-2938
(2009).
Tuktarov A.R., Akhmetov A.R., Kamalov R.F., Khalilov L.M.,
Pudas M., Ibragimov A.G., and Dzhemilev U.M.,
Catalytic [2+1]-cycloaddition of ethyl diazoacetate to
fullerene [60],
Russian Journal of Organic Chemistry 45,
1168-1174 (2009).
Päivänranta B., Pudas M., Pitkänen O., Leinonen K.,
Kuittinen M., Baroni P.-Y., Scharf T., and Herzig
H.-P.,
Liquid
phase deposition of polymers on arbitrary shaped surfaces
and their suitability for e-beam patterning,
Nanotechnology 20, 225305 (2009).
Vähäsöyrinki M., Tuukkanen T., Sorvoja H., and Pudas M.,
A minimally invasive displacement sensor for measuring brain
micromotion in 3D with nanometer scale resolution,
Neuroscience Methods 180,
290-295 (2009).
Ruuska T., Lehtonen S., Pudas M., Sipola R., Tuhkanen V.,
Pitkänen O., Kursu O., Röning J., Horton M., and Lehenkari
P.,
Cell-extracellular matrix adhesion forces in cultured cells,
Bone 44, 320-321 (2009).
Kursu O., Kruusing A., Pudas M., and Rahkonen T.,
Piezoelectric Bimorph Charge Mode Force Sensor,
Sensors and Actuators A: Physical 153, 42-49
(2009).
Puustinen J., Lappalainen J., Hiltunen J., and
Lantto V.,
Optical scattering of nanocrystalline Pb(ZrxTi1−x)O3
films,
Journal of the European Ceramic Society
Doi:10.1016/j.jeurceramsoc.2009.05.047
(2009).
Palukuru V., Peräntie J., Komulainen M., Tick T., Jäntti J.,
and Jantunen H.,
In-Band Frequency-Tunable Ceramic Planar Inverted-F Antenna
(PIFA) Utilizing an Integrated BST-Based Variable Capacitor,
Ferroelectrics 388, 10-16 (2009).
Teirikangas M., Juuti J., Hu T., and & Jantunen H.,
Extrinsic Influences of the Polymer Matrix on Electrical
Properties of High Frequency Composites,
Ferroelectrics 387, 70-76 (2009).
Starkova A.S., Karmanenko S.F., Pakhomova O.V., Es’kov A.V.,
Semikin D., and Hagberg J.,
Electrocaloric Response of a Ferroelectric Capacitor to a
Periodic Electric Field,
Physics of the Solid State 51, 1510–1514
(2009).
Sonoda K., Hu T., Juuti J., Moriya Y., and &
Jantunen H.,
Fabrication and properties of composites from BST and
polypropylene-graft-poly(styrene-stat-divinylbenzene),
Journal of the European Ceramic Society
DOI:10.1016/j.jeurceramsoc.2009.08.019 (2009).
Tyunina M., and Levoska J.,
Unstable state in epitaxial films of sodium niobate,
Appl. Phys. Lett. 95,
102903 (2009).
Hu T., Palukuru V.K., Jantunen H., Hsi C.S., and
Safari A.,
RF Properties of LTCC BST Thick Film Made by MicroPen,.
Ferroelectrics 388, 17-22 (2009).
Simakova O.A., Leino A.-R., Mäki-Arvela P., Campo B.,
Kordás K., Mikkola J.-P., and
Murzin D.Y.,
Linoleic acid
isomerization over mesoporous carbon supported gold
catalysts,
Catalysis Today DOI:10.1016/j.cattod.2009.07.065 (2009).
Virtanen P., Mikkola J.-P., Toukoniitty E., Karhu H.,
Kordás K., Eränen K.,Wärnå J. & Salmi T.,
Supported ionic liquid catalysts—From batch to continuous
operation in preparation of fine chemicals,
Catalysis Today DOI:10.1016/j.cattod.2009.07.020 (2009).
Hamada A.S., Karjalainen L.P., and Puustinen J.,
Fatigue behavior of high-Mn TWIP steels,
Materials Science and Engineering: A 517,
68-77 (2009).
Honkamo J., Jantunen H., Subodh G., Sebastian M.T., and Mohanan P.,
Tape Casting and Dielectric Properties of Zn2Te3O8-Based
Ceramics with an Ultra-Low Sintering Temperature,
International Journal of Applied Ceramic Technology 6,
531-536 (2009).
Srifi
M.N., Palukuru V.K., Essaaidi M., and Jantunen H.,
Compact Planar Monopole Antenna for 3G and UWB applications,
Microwave and Optical Technology Letters 51, 1939-1942
(2009).
Virtanen P., Karhu H., Toth G., Kordas K., and Mikkola J.-P.,
Towards one-pot synthesis of menthols from citral: Modifying Supported Ionic
Liquid Catalysts (SILCAs) with Lewis and Bronsted acids,
Journal of Catalysis 263, 209-219 (2009).
Remes
J., Vähäkangas J., and Uusimäki A.,
Improving the Yield and Turn-Around Time of Focused Ion Beam Microsurgery of
Integrated Circuits by LCVD Method,
IEEE Transactions on Advanced Packaging 32, 497-502 (2009).
Sápi A., Rémiás R., Kónya Z., Kukovecz Á., Kordás K., and Kiricsi I.,
Synthesis and characterization of
nickel catalysts supported on different carbon materials,
React.
Kinet. Cata. Lett. 96, 379-389 (2009).
Rautio J., Perämäki P., Honkamo J. & Jantunen H.,
Effect of synthesis method variables on particle size in the preparation of
homogeneous doped nano ZnO material,
Microchemical Journal 91, 272-276 (2009).
Tyunina M., Plekh M., and Levoska J.,
Intrinsic dipolar glass
behavior in epitaxial films of relaxor PbMg1/3Nb12/3O3,
Physical Review B 79, 054105
(2009).
Peräntie J., Hagberg J., Uusimäki A., and
Jantunen H.,
Field-induced thermal response and irreversible phase transition enthalpy
change in PbMg1/3Nb12/3O3–PbTiO3,
Appl.
Phys.
Lett. 94, 102903 (2009).
Narkilahti J., Plekh M., Levoska J., and Tyunina
M.,
Anomalous growth and properties of SrTiO3-NaNbO3
superlattices,
Physical Review B 79, 014106 (2009).
Vuollo P., Honkamo J., Niemelä M., Perämäki P., and Jantunen H.,
Determination of boron and lithium in ferroelectric samples by ICP-OES and
ICP-MS,
Microchimica Acta 164, 217-224 (2009).
Tick T., Jäntti J., Henry M., Free C., and
Jantunen H.,
LTCC integrated air-filled waveguides for G-band applications,
Microwave and Optical Technology Letters 51, 176-178 (2009).
Toth
G., Mäklin J., Halonen N., Palosaari J., Juuti J.,
Jantunen H., Kordas K., Sawyer W.G., Vajtai R., and Ajayan
P.M.,
Carbon Nanotube Based Electrical Brush Contacts,
Advanced Materials 21, 1–5 (2009).
2008 PUBLICATIONS
PAPERS
Lappalainen J, Heinilehto S, Jantunen H & Lantto V (2008)
Electrical and
optical properties of
metal-insulator-transition VO2
thin films. Journal of Electroceramics
DOI
10.1007/s10832-008-9433-2
Nuzhnyy D, Petzelt J,
Kamba S, Yamada T, Tyunina M, Tagantsev AK, Levoska J &
Setter N (2008)
Polar phonons in some
compressively stressed epitaxial and polycrystalline SrTiO3
thin films. Journal of Electroceramics DOI
10.1007/s10832-008-9494-2
Tyunina M, Jaakola I, Plekh M &
Levoska J (2008)
Nanoscale engineering of
ferroelectric functionality. Journal of
Electroceramics DOI 10.1007/s10832-008-9435-0
Heinonen E, Juuti J, Moilanen V-P, Palosaari J & Jantunen H, (2009)
Structurally graded monolithic
piezoelectric actuator modelling and optimization with FEM.
Journal of Intelligent Material Systems and Structures,
20(6): 759-766.
Sobocinski M, Juuti J, Jantunen H & Golonka L (2009)
Piezoelectric unimorph valve
assembled on LTCC substrate. Sensors and Actuators A
Physical 149(2): 315-319.
Puustinen J, Lappalainen J, Hiltunen J & Lantto V (2008)
Variations of Optical Properties with Phase Co-Existence in PZT Thin Films. Ferroelectrics 370(1): 46-56.
Palosaari J, Juuti J, Heinonen E, Moilanen P & Jantunen H (2009)
Electromechanical Performance of
Structurally Graded Monolithic Piezoelectric Actuator.
Journal of
Electroceramics, 22(1): 156-162.
Hiltunen J, Seneviratne D,
Tuller HL, Lappalainen J & Lantto V (2008)
Crystallographic and dielectric
properties of highly oriented BaTiO3 films: Influence of
oxygen pressure utilized during pulsed laser deposition.
Journal of Electroceramics DOI10.1007/s10832-008-9443-0.
Hiltunen J, Seneviratne D, Sun
R, Stolfi M, Tuller HL, Lappalainen J & Lantto V
(2008)
Optical properties of
BaTiO3 thin films: Influence of oxygen pressure utilized
during pulsed laser deposition.
Journal of Electroceramics
DOI10.1007/s10832-008-9463-9.
Palosaari J, Juuti J & Jantunen H (2008)
Displacement distribution of the PRESTO actuator
with multiple passive and active regions. Sensors and Actuators A: Physical
148(1): 129-133.
Kangasvieri T, Halme J,
Vahakangas J & Lahti M (2008)
Low-loss and broadband BGA
package transition for LTCC-SiP applications. Microwave and
Optical Technology Letters 50(4): 1036-1040.
Kangasvieri T, Halme J, Vahakangas J & Lahti M
(2008)
Broadband BGA-via transitions for reliable RF/microwave LTCC-SiP module
packaging Source. IEEE Microwave and Wireless Components Letters 18(1):
34-36.
Reynolds K, Komulainen J, Lovera P,
Iacopino D, Pudas M, Vähäkangas J & Redmond G (2008)
Probe based manipulation and assembly of
nanowires into organized mesostructures. Nanotechnology 19: 485301, doi:
10.1088/0957-4484/19/48/485301.
Heszler P, Gingl Z, Mingesz R, Csengeri A,
Haspel H, Kukovecz Á, Kónya Z, Kiricsi I, Ionescu R,
Mäklin J, Mustonen T, Tóth G, Halonen N, Kordás K, Vähäkangas J & Moilanen H
(2008)
Drift effect of fluctuation enhanced gas sensing
on carbon nanotube sensors. Physica status solidi (b) 245(10): 2343.
Haspel H, Ionescu R, Heszler P, Á. Kukovecz Á,
Kónya Z, Z. Gingl, Mäklin J, Mustonen T, Kordás K, Vajtai
R & Ajayan PM (2008)
Fluctuation enhanced gas sensing on
functionalized carbon nanotube thin films. Physica status solidi
(b) 245(10): 2339.
Mäklin J, Mustonen T, Halonen N, Tóth G, Kordás
K, Vähäkangas J, Moilanen H, Kukovecz Á, Kónya Z, Haspel H, Gingl Z,
Heszler P, Vajtai R & Ajayan PM (2008)
Inkjet printed resistive and chemical-FET carbon nanotube gas sensors. Physica status solidi (b) 245(10): 2335.
Komulainen M, Kangasvieri T, Jäntti J & Jantunen H (2008)
Compact surface-mountable LTCC-BGA antenna
module for X-band applications. International Journal of Microwave and
Optical Technology. 3(4): 451-459.
Juuti J, Leinonen M & Jantunen H (2008)
Micropositioning, Book Chapt. in Piezoelectric
and Acoustic Materials for Transducer Applications , ed. by Safari A &
Akdogan EK, Springer, pgs. 319-339.
Peräntie J, Hagberg J, Uusimäki A & Jantunen H (2008)
Temperature characteristics and
development of field-induced phase transition in relaxor ferroelectric
Pb(Mg1/3Nb2/3)0.87Ti0.13O3 ceramics.
Appl. Phys. Lett. 93: 32905.
Hsi CS, Chen YC, Jantunen H, Wu MJ & Lin TC
(2008),
Barium titanate based dielectric sintered with a
two-stage process. Journal of the European Ceramic Society, 28(13):
2581-2588.
Putaala J, Kangasvieri T, Nousiainen O, Jantunen
H & Moilanen M (2008)
Detection of thermal cycling-induced failures in
RF/microwave BGA assemblies. IEEE Transactions on Electronics
Packaging Manufacturing, 31(3): 240-247.
Puustinen J, Lappalainen J & Lantto V
(2008)
Effect of microstructure and surface morphology evolution on optical properties of Nd-modified Pb(ZrxTi1-x)O-3 thin films. Thin Solid films, 516(18): 6458-6463.
Hiltunen J, Lappalainen J, Puustinen J, Lantto V & Tuller HL (2008)
Size-dependent optical properties of BaTiO3-SrTiO3 superlattices. Optics Express 16(11): 8219-8228.
Palukuru VK, Komulainen M, Tick T, Peräntie J & Jantunen H (2008)
Low-sintering-temperature ferroelectric thick
films; RF properties and an application in a frequency-tunable folded slot
antenna. IEEE Antennas & Wireless Propag. Lett., 7:
Digital Object Identifier:
10.1109/LAWP.2008.2001120.
Tick T, Peräntie J, Rentsch S, Müller J, Hein M
& Jantunen H (2008)
Co-sintering of barium strontium titanate (BST)
thick films inside a LTCC substrate with pressure-assisted sintering.
Journal of the European Ceramic Society, 28(14): 2765-2769
Sebastian MT & Jantunen H (2008)
Low loss dielectric materials for LTCC
applications: a review. International Materials Reviews 53(2): 57-90.
Tick T & Jantunen H (2008)
An X-Ray Imaging-Based Layer Alignment and Tape
Deformation Inspection System for Multilayer Ceramic Circuit Boards. IEEE
Transactions on Electronics Packaging Manufacturing 31(2): 168-173.
Hagberg J, Uusimäki A & Jantunen H (2008)
Electrocaloric characteristics in reactive
sintered 0.87Pb(Mg1/3Nb2/3)O3 - 0.13PbTiO3. Applied Physics Letters 92:
132909.
Mustonen T, Mäklin J, Kordás K, Halonen N, Tóth
G, Vähäkangas J, Jantunen H, Kar S, Ajayan PM, Vajtai R, Helistö P & Seppä H
(2008)
Controlled Ohmic and nonlinear electrical
transport in inkjet printed single-wall carbon nanotube films. Physical
Review B 77: 125430.
Halonen N, Kordás K, Tóth G, Mustonen T, Mäklin
J, Vähäkangas J, Ajayan PM & Vajtai R (2008)
Controlled CCVD synthesis of robust multi-walled
carbon nanotube films. Journal of Physical Chemistry C,
Murzina EV, Tokarev AV, Kordás K, Karhu H,
Mikkola JP & Murzin DY (2008)
D-Lactose oxidation over gold catalysts.
Catalysis Today 131(3): 385-392.
Komulainen M, Berg M, Jantunen H, Salonen E &
Free C (2008)
A frequency-tuning method for a planar
inverted-F antenna. IEEE Transactions on Antennas and Propagation
56(4): 944-950.
Lappalainen J, Heinilehto S, Saukko S , Lantto V & Jantunen H (2008)
Microstructure dependent switching properties of
VO2 thin films. Sensors and Actuators A -Physical 142(1): 250-255.
Tick T, Perantie J, Jantunen H & Uusimäki A (2008)
Screen printed low-sintering-temperature barium
strontium titanate (BST) thick films. Journal of the European Ceramic
Society 28(4): 837-842.
Kangasvieri T, Komulainen M, Jantunen H & Vähäkangas J (2008)
Low-loss and wideband package transitions for
microwave and millimeter-wave MCMs. IEEE Transactions on Advanced
packaging 31(1): 170-181.
Tick T, Palukuru V, Komulainen M, Perantie J. &
Jantunen H (2008)
Method for manufacturing embedded variable
capacitors in low-temperature cofired ceramic substrate. Electronics Letters
44(2): 94-95.
Tuktarov AR, Akhmetov AR, Pudas M, Ibragimov AG & Dzhemilev UM (2008)
Selective addition of H2O to fullerene C-60
catalyzed by Ti, Zr, and Hf catalysts. Tetrahedron Letters 49(5):
808-810
Tóth G, Kordás K, Ajayan PM & Vajtai R (2008)
Cooling with integrated carbon nanotube films,
Nanostructures in Electronics, ed. by Rahman F, Pan Stanford Publications,
Singapore.
Voutilainen J, Putaala J, Moilanen M & Jantunen H (2008)
A prognostic method for the embedded failure monitoring of solder interconnections with 1149.4 test bus architecture. Microelectronics Journal.
Fan J, Leppävuori S, Luusua I, Henttinen K, Eränen S, Hietanen I & Juntunen M (2008)
Fabrication of silicon based through-wafer
interconnects for advanced chip scale packaging. Sensors and Actuators A
142(1): 405-412.
Fan J, Kalliopuska J, Eränen S, Juntunen M,
Hietanen I & Leppävuori S (2008)
Via-in-pixel design of truly 2D extendable
photodiode detector for medical CT imaging. Sensors and Actuators A 145–146
(2008) 59–65.
PAPERS
Kishi S, Yuasa M, Kida T, Lantto VE, Shimanoe K&
Yamazoe N (2007)
A stable solid-reference electrode of
BiCuVOx/perovskite-oxide for potentiometric solid electrolyte CO2 sensor.
Journal of the
Ceramic Society of Japan 115 (1347): 706-711.
Huotari M & Lantto V (2007)
Measurements of odours based on response
analysis of insect olfactory receptor neurons. Sensors and Actuators
B-Chemical 127(1): 284-287
Komulainen M, Mähönen J, Tick T, Berg M,
Jantunen H, Henry M, Free C & Salonen E (2007)
Embedded air cavity backed microstrip antenna on
an LTCC substrate. Journal of the European Ceramic Society 27(8-9):
2881-2885
Komulainen M, Berg M, Jantunen H & Salonen E
(2007)
Compact varactor-tuned meander line monopole
antenna for DVB-H signal reception. IEE Electronics Letters 43(24):
1324-1326
Komulainen M, Palukuru VK & Jantunen H (2007)
Frequency tunable dual-band planar inverted-F
antenna based on a switchable paracitic element. FREQUENZ - Journal of
RF-Engineering and Telecommunications 61(9-10): 207-212
Nousiainen O, Putaala J, Kangasvieri T,
Rautioaho R & Vähäkangas J (2007)
Failure mechanisms of thermomechanically loaded
SnAgCu/plastic core solder ball composite joints in lowtemperature co-fired
ceramic/printed wiring board assemblies. Journal of Electronic Materials
36(3): 232-241
Kangasvieri T, Halme J, Vähäkangas J & Lahti M
(2007)
High performance vertical transition for broadband millimetre-wave BGA module packaging. Electronics Letters 43(11): 638-639
Nousiainen O, Kangasvieri T, Rönkä K, Rautioaho R & Vähäkangas J (2007)
Interfacial reactions between Sn-based solders
and AgPt thick film metallizations on LTCC. Soldering & Surface Mount
Technology 19(3): 15-25.
Leinonen M, Juuti J & Jantunen H (2007)
Interface circuit for resistive sensors
utilizing digital potentiometers. Sensors and Actuators A 138(1): 97-104.
Heinonen E, Juuti J & Jantunen H (2007)
Characteristics of piezoelectric cantilevers
embedded in LTCC. Journal of European Ceramic Society 27(13-15): 4135-4138.
Hu T, Juuti J & Jantunen H (2007)
RF properties of BST-PPS composites. Journal of
European Ceramic Society 27(8-9): 2923-2926.
Hu T, Juuti J, Jantunen H & Vilkman T (2007)
Dielectric properties of BST/polymer composite.
Journal of the European Ceramic Society 27(13-15): 3997-4001.
Honkamo J, Hannu J, Jantunen H, Moilanen M & Mielcarek W (2007)
Microstructural and electrical properties of
multicomponent varistor ceramics with PbO-ZnO-B2O3 glass addition. Journal
of Electroceramics 18(3-4): 175-181.
Sebastian MT, Uusimäki A & Jantunen H (2007)
Editorial Journal of the European Ceramic
Society, 27(8-9): 2745.
Pudas M, Viollet S, Ruffier F, Kruusing A, Amic
S, Leppävuori S & Franceschini N (2007)
A miniature bio-inspired optic flow sensor based
on low temperature co-fired ceramics (LTCC) technology. Sensor and Actuators
A 133(1): 88-95.
Dzhemilev UM, Ibragimov AG, D’yakonov VA, Pudas
M, Bergmann U, Khafizova LO & Tyumkina TV (2007)
First example of one-pot synthesis of
hydrocarbon macrorings. Russian Journal of Organic Chemistry 43(5): 681-684.
Dzhemilev UM, Ibragimov AG, Pudas M, D’yakonov
VA & Tuktarov AR (2007)
Cycloaddition of tertiary amines to fullerene
C-60, catalyzed by Ti, Zr, and Hf complexes. Russian Journal of Organic
Chemistry 43(3): 370-374.
Dzhemilev UM, Ibragimov AG, Tuktarov AR,
D’yakonov VA, Pudas M & Bergmann U (2007)
Catalytic hydroamination of fullerene C-60 with primary and secondary amines. Russian Journal of Organic Chemistry 43(3): 375-379.
Heiskanen J, Omar WAE, Ylikunnari M, Haavisto K, Juan M & Hormi O (2007)
Synthesis of 4-Alkoxy-8-hydroxyquinolines,
Journal of Organic Chemistry 72(3): 920-922.25
Kordás K, Mustonen T, Tóth G, Vähäkangas J,
Uusimäki A, Jantunen H, Gupta A, Rao KV, Vajtai R & Ajayan PM (2007)
Magnetic-field induced efficient alignment of
carbon nanotubes in aqueous solutions. Chemistry of Materials 19(4):
787-791.
Kordás K, Tóth G, Moilanen P, Kumpumäki M,
Vähäkangas J, Uusimäki A, Vajtai R & Ajayan PM (2007)
Chip cooling with integrated carbon nanotube
microfin architectures. Applied Physics Letters 90: 123105.
Mäklin J, Mustonen T, Kordás K, Saukko S &
Vähäkangas J (2007)
Nitric oxide gas sensors with functionalized carbon nanotubes. Physica Status Solidi B 244(11): 4298-4302.
Mustonen T, Kordás K, Saukko S, Tóth G, Penttilä JS, Helistö P, Seppä H & Jantunen H (2007)
Inkjet printing of transparent and conductive
patterns of single-walled carbon nanotubes and PEDOT-PSS composites. Physica
Status Solidi B 244 (11): 4336- 4340.
Mikkola J-PT, Virtanen PP, Kordás K, Karhu H &
Salmi TO (2007)
SILCA—Supported ionic liquid catalysts for fine
chemicals, Applied Catalysis A 328(1): 68-76.
Virtanen P, Karhu H, Kordás K & Mikkola J-P (2007)
The effect of ionic liquid in supported ionic
liquid catalysts (SILCA) in the hydrogenation of a, b-unsaturated aldehydes.
Chemical Engineering Science 62(14): 3660-3671.
Tyunina M, Levoska J & Jaakola I (2007)
Dynamic disorder in BaTiO3 epitaxial films,
Physical Review B 75: 140102(R).
Tyunina M & Levoska J (2007)
The paraelectric state in thin-film (Ba,Sr)TiO3.
Journal of Applied Physics 101: 084119.
Jaakola I, Levoska J & Tyunina M (2007)
Multilayers and superlattices of ferroelectric
barium strontium titanate. Journal of Applied Physics 102: 014108.
Kamba S, Nuzhnyy D, Veljko S, Bovtun V, Petzelt
J, Wang YL, Setter N, Levoska J, Tyunina M, Macutkevic J & Banys J (2007)
Dielectric relaxation and polar phonon softening
in relaxor ferroelectric PbMg1/3Ta2/3 O3. Journal of Applied Physics 102:
074106.
Tyunina M, Jaakola I, Levoska J & Plekh M (2007)
Diffuse phase transitions in epitaxial (Ba,
Sr)TiO3 superlattices. Physical Review B 76: 134107.
PAPERS
M.
Tyunina, J. Levoska,
Application of the interface capacitance model to thin-film relaxors and
ferroelectrics, APPLIED PHYSICS LETTERS 88 (26): Art. No. 262904 JUN 26 2006
M.
Tyunina,
Size effects and dielectric behaviour in
ferroelectric heterostructures, JOURNAL OF
PHYSICS-CONDENSED MATTER 18 (24): 5725-5738 JUN 21 2006
K. Kordas, A.E. Pap, G. Toth, M.
Pudas, J. Jaaskelainen, A. Uusimaki J. Vahakangas,
Laser soldering of flip-chips, OPTICS AND LASERS IN ENGINEERING 44 (2):
112-121 FEB 2006
K. Kordas, T. Mustonen, G. Toth, H.
Jantunen, M. Lajunen, C. Soldano, S. Talapatra, S. Kar, R. Vajtai, and P. M.
Ajayan, "Inkjet printing of electrically conductive patterns of carbon
nanotubes“, SMALL, 2 (No.8-9) pp. 1021-1025 (2006)
K. Kordas, G. Toth, J. Levoska, M. Huuhtanen, R.
Keiski, M. Harkonen, T.F.George, J. Vahakangas,
Room temperature chemical
deposition of palladium nanoparticles in anodic aluminium oxide templates ,
NANOTECHNOLOGY 17 (5): 1459-1463 MAR 14 2006
A.E. Pap, K. Kordas, J. Vahakangas, A.Uusimäki,
S. Leppävuori, L. Pilon, S. Szatmari,
Optical properties of porous
silicon. Part III: Comparison of experimental and theoretical results,
OPTICAL MATERIALS 28 (5): 506-513 APR 2006
K.M. Lum, T. Tick, C. Free, H. Jantunen,
Design and measurement data for a microwave dual-CP antenna using a new
traveling-wave feed concept, IEEE TRANSACTIONS ON MICROWAVE THEORY AND
TECHNIQUES 54 (6): 2880-2886 Part 2 JUN 2006
J.A. Juuti, H. Jantunen V.P.
Moilanen, S. Leppävuori,
Manufacturing of prestressed piezoelectric unimorphs using a postfired
biasing layer, IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY
CONTROL 53 (5): 838-846 MAY 2006
T. Kangasvieri, I. Hautajarvi, H.
Jantunen, J. Vähäkangas,
Miniaturized low-loss Wilkinson power divider for RF front-end module
applications, MICROWAVE AND OPTICAL TECHNOLOGY LETTERS 48 (4): 660-663 APR
2006
T. Kangasvieri, O. Nousiainen, J.
Putaala, R. Rautioaho, J. Vähäkangas,
Reliability and RF performance of BGA solder joints with plastic-core solder
balls in LTCC/PWB assemblies, Microelectronics Reliability 46 (2006)
1335-1347.
O. Nousiainen, J. Putaala, T. Kangasvieri, R. Rautioaho, J. Vähäkangas,
Metallurgical Reactions in Composite 90Pb10Sn/Lead-Free Solder Joints and
Their Effect on Reliability of LTCC/PWB Assembly, Journal of Electronic
Materials 35, No. 10 (2006)1857-1865.
M. Pudas, A. Kruusing, J. Saavalainen, J. Mähönen, J. Vähäkangas,
Novel laser processing applications for microelectronics, LASERS IN
ENGINEERING 16 (1-2): 133-155 2006
J. Lappalainen, V. Lantto, J. Frantti, J. Hiltunen,
X-ray diffraction and Raman investigations of thickness dependent stress
effects on Pb(ZrxTi1-x)O-3 thin films, APPLIED PHYSICS LETTERS 88 (25): Art.
No. 252901 JUN 19 2006
L.
Reyes, A. Hoel, S. Saukko, et al.,
Gas sensor response of pure and activated WO3 nanoparticle films made by
advanced reactive gas deposition, SENSORS AND ACTUATORS B-CHEMICAL 117 (1):
128-134 SEP 12 2006
Kek-Merl
D, Lappalainen J, Tuller HL,
Electrical properties of nanocrystalline CeO2 thin films deposited by in
situ pulsed laser deposition, JOURNAL OF THE ELECTROCHEMICAL SOCIETY 153
(3): J15-J20 2006
Tuominen J,
Lappalainen J, Hiltunen J, et al.
Piezoelectric thin-film
unimorph actuator for optical fibre alignment applications, JOURNAL OF
OPTICS A-PURE AND APPLIED OPTICS 8 (7): S398-S404 Sp. Iss.
SI JUL 2006
Lappalainen J,
Frantti J, Hiltunen J, et al.
Stress and film thickness
effects on the optical properties of ferroelectric Pb(ZrxTi1-x)O-3 films,
FERROELECTRICS 335: 149-158 2006
Tyunina
M, Levoska J,
Dynamic dielectric nonlinearity in epitaxial thin-film relaxors and
ferroelectrics, FERROELECTRICS 339: 1771-1779 2006
Jaakola
I, Levoska J, Tyunina M,
Thin film multilayers of ferroelectric barium strontium titanate,
FERROELECTRICS 335: 127-136 2006
Tyunina M, Levoska J, Jaakola I,
Polarization relaxation in
thin-film relaxors compared to that in ferroelectrics, PHYS. REV.
B 74, 104112 (2006)
Kroneld M, Novikov S, Saukko S, Kuivalainen P, Kostamo P, Lantto V,
Gas sensing properties of SnO2
thin films grown by MBE,
SENSORS AND ACTUATORS B-CHEMICAL 118 (1-2): 110-114 OCT 25
2006
Hiltunen J, Seneviratne D, Sun R, Stolfi M, Tuller HL, Lappalainen J, Lantto V
BaTiO3-SrTiO3
multilayer thin film electro-optic waveguide
modulator, APPLIED PHYSICS LETTERS 89 (24):
Art. No. 242904 DEC 11 2006
M. Tyunina, J. Levoska,
Response to “Comment on ‘Application of the interface capacitance model to
thin-film relaxors and ferroelectrics´'", Applied Physics Letters 89 (2006)
196102/1-2.
PAPERS
A.E. Pap, K. Kordas, G. Toth, J. Levoska, A. Uusimäki, J. Vähäkangas, S.
Leppävuori, T.F. George,
Thermal oxidation of porous silicon: Study on structure, Applied Physics
Letters 86 [4](2005) Art. No. 041501 JAN 24 2005
K. Kordas K, A.E. Pap, J.
Saavalainen, H. Jantunen, P. Moilanen, E. Haapaniemi, S. Leppävuori,
Laser-induced surface activation of LTCC materials for chemical
metallization, IEEE Transactions on Advanced Packaging 28 [2](2005)259-263
T. Hu, A. Uusimäki, H. Jantunen,
S. Leppävuori, K. Soponmanee, S. Sirisoonthorn,
Optimization of MgTiO3-CaTiO3 based LTCC tapes containing B2O3 for use in
microwave applications, Ceramics International 31 [1](2005)85-93
A. Hoel, L. R. Reyes, S. Saukko, P.
Heszler, V. Lantto, C.G. Granqvist,
Gas sensing with films of
nanocrystalline WO3 and Pd made by advanced reactive gas deposition,
Sensors and Actuators B-Chemical 105 [2](2005)283-289
J. Juuti, K. Kordas, R. Lonnakko, V.P. Moilanen, S. Leppävuori,
Mechanically amplified large
displacement piezoelectric actuators, Sensors and Actuators A-Physical 120
[1](2005)225-231
T. Hu, T.J. Price, D.M. Iddles, A. Uusimäki, H.
Jantunen,
The effect of Mn on the
microstructure and properties of BaSrTiO3 with B2O3-Li2CO3, Journal of
the European Ceramic Society 25 (2005) 2531- 2535
V.
Shvartsman, A. Kholkin, M. Tyunina, J. Levoska,
Relaxation of induced polar state in relaxor
PbMg1/3Nb2/3O3 thin films
studied by piezoresponse force microscopy, Applied Physics Letters 86
(2005) 222907/1-3.
M. Tyunina, J. Levoska,
Phase
diagram of thin film relaxor PbMg1/3Nb2/3O3,
Journal of Applied Physics 97 (2005) 114107/1-7.
J. Lappalainen, J. Hiltunen, V. Lantto,
Characterization of optical properties of nanocrystalline doped PZT thin
films, Journal of the European Ceramic Society 25 (2005) 2273-2276.
M. Tyunina, J. Levoska,
Epitaxial films of relaxor ferroelectric PbMg1/3Nb2/3O3
in strong electric fields, Ferroelectrics 318 (2005) 29-34.
J. Levoska, M. Tyunina, I. Jaakola,
Compositional evolution of structure and dielectric properties in Ba1-xSrxTiO3
epitaxial thin-film heterostructures, Ferroelectrics 318 (2005) 49-53.
M. Tyunina, J. Levoska,
Compositional evolution of properties in epitaxial films of relaxor PbMg1/3Nb2/3O3
– PbTiO3, Ferroelectrics 318 (2005) 63-66.
M. Pudas, J. Hagberg, S. Leppävuori,
Roller type gravure offset printing of conductive
inks for high resolution printing on ceramic substrates, International
Journal of Electronics 92 No 5 (2005) 251-269.
M. Pudas, N. Halonen, P. Granat, J. Vähäkangas,
Gravure printing of conductive particulate polymer inks on flexible
substrates, Progress in Organic Coatings 54 (2005)310-316.
E. Heinonen, J. Juuti, S.
Leppävuori,
Characterization and modelling of 3D
piezoelectric ceramic structures with ATILA software, Journal of the
European Ceramic Society 25 (2005) 2467-2470.
M. Tyunina, J. Levoska,
Effect of ac field on the dielectric behavior in epitaxial films of relaxor
ferroelectric PbMg1/3Nb2/3O3, Physical
Review B 72 (2005) 104112-1-9.
K.
Kordás, A.E. Pap, J. Vähäkangas, A. Uusimäki, S. Leppävuori,
Carbon nanotube synthesis on oxidized porous silicon, Applied Surface
Science 252 (2005) 1471-1475.
L.
Jylhä, J. Honkamo, H. Jantunen, A. Sihvola,
Microstructure -based numerical modeling method
for effective permittivity of ceramic/polymer composites, Journal of Applied
Physics 97 (2005) 104104-1-7.
J.
Juuti, H. Jantunen, V.-P. Moilanen, S. Leppävuori,
Poling conditions of pre-stressed piezoelectric
actuators and their displacement, Journal of Electroceramics 15 (2005)
57-64.
O.
Nousiainen, R. Rautioaho, K. Kautio, J. Jääskeläinen, S. Leppävuori,
Solder joint reliability in AgPt-metallized
LTCC, Soldering & Surface Mount Technology 17, No 3 (2005) 32-42.
G. Toth, K. Kordas, J. Vahakangas, A. Uusimaki,
T.F. George, L. Nanai,
Laser-induced gold
deposition on p(+)-Si from liquid precursors: A study on the reduction of
gold ions through competing Dember and Seebeck effects, Journal of Physical
Chemistry B 109 [15] (2005) 6925-6928.
G.
Toth, K. Kordas, A.E. Pap, J. Vahakangas, A. Uusimaki, S. Leppavuori,
Origin and FEM-assisted evaluation of residual
stress in thermally oxidized porous silicon,
Computational
Materials Science 34 [2] 2005 123-128.
PAPERS
J.
Juuti, A. Lozinski,
LTCC compatible PLZT
thick-films for piezoelectric devices, Sensors and Actuators A 110 (2004)
361-364.
H. Jantunen, T. Hu, A. Uusimäki, S. Leppävuori,
T. Hu, H. Jantunen, A. Uusimäki, S. Leppävuori,
BST powder with sol-gel process in tape casting and firing, Journal of the
European Ceramic Society 24 (2004) 1111-1116.
J. Lappalainen, D. Kek, H. L. Tuller,
High carrier density CeO2
dielectrics - implications for MOS devices, Journal of the European Ceramic
Society 24 (2004)
V. Piatnitsa, E. Jakku, S. Leppävuori,
Design of a 2-pole LTCC
filter for wireless communications, IEEE Transactions on Wireless
Communications, 3, No 2, March 2004, 379-381
M. Pudas, J. Hagberg,
Gravure offset printing of
polymer inks for conductors, Process in Organic Coatings 49 (2004) 324-335.
M. Tyunina, J. Levoska,
Thin films of relaxor ferroelectrics, Ferroelectrics 298 (2004)
362-366.
M. Tyunina, J. Levoska, K. Kundzinsh, V. Zauls,
Polar state in epitaxial films of relaxor ferroelectric PbMg1/3Nb2/3O3,
Physical Review B 69 (2004) 224101/1-10.
M. Pudas, Ken Elsey, Alison Logan, J. Hagberg, S. Leppävuori,
Methods for evaluation of
fine-line circuitry printing inks, Coloration Technology 120 (3) 2004
119-126.
M. Pudas, J. Hagberg, S. Leppävuori,
Printing parameters and ink
components affecting ultra-fine-line gravure-offset printing for electronics
applications, Journal of the European Ceramic Society 24 (2004)
2943-2950.
M. Pudas, J. Hagberg, S. Leppävuori,
The Self-Cleaning Gravure
(SCG), a Solution for Gravure Groove Blocking and a Novel Printing Method,
The Journal of Imaging Science and Technology 48 (4) 2004, 375-381.
M. Pudas, J. Hagberg, S. Leppävuori,
Gravure offset printing of
conductive polymer ink, Progress in organic coatings 49 No 4 (2004) 324-335.
P. Granat, M. Pudas, O.
Hormi, J. Hagberg and
Synthesis of acrylated
ethylcellulose for UV-curing ink, Carbohydrate Polymers 57 No 2 (2004)
225-228.
K. Kordás, A.E. Pap, S. Beke,
J. Frantti, S. Eriksson, S. Hull, S. Ivanov, V. Lantto, J. Lappalainen, M.
Kakihana,
High resolution neutron
powder diffraction study of the microstrain contribution in Pb(ZrxTi1-x)O3
ceramics,
K. Kordás, S. Beke, A.E. Pap, A. Uusimäki, S. Leppävuori
Optical properties of porous silicon (Part II) - Fabrication and
investigation of multilayer structures, Optical Materials 25 (2004) 257-260.
A.Kruusing,
Underwater and
water-assisted laser processing Part 1. General features, steam cleaning and
shock processing. Optics and Lasers in Engineering 41 (2004) 307-327.
A.Kruusing,
Underwater and
water-assisted laser processing Part 2. Etching, cutting and rarely used
methods. Optics and Lasers
in Engineering 41 (2004) 329-352.
Jari Juuti, Esa Heinonen, Veli-Pekka Moilanen and Seppo Leppävuori,
H. Jantunen, T. Hu, A. Uusimäki, S. Leppävuori,
Ferroelectric LTCC for
multilayer devices, Journal of Ceramic Society of Japan 112[5] (2004)
S1552-1556.
M. Tyunina, K. Kundzinsh, V. Zauls, J. Levoska,
Ferroelectric behavior in epitaxial films of relaxor PbMg1/3Nb2/3O3,
Ferroelectrics 302 (2004) 285-288.
T. Hu, H. Jantunen, A. Deleniv, S. Leppävuori, S. Gevorgian,
Electric-field-controlled
permittivity ferroelectric composition for microwave LTCC modules, Journal
of the American Ceramic Society 87[4] (2004) 578-583.
V. Shvartsman, M. Tyunina, J. Levoska, A. Kholkin,
Local electromechanical properties of PbMg1/3Nb2/3O3
thin films studied by piezoelectric force microscopy,
M. Tyunina, J. Levoska,
Coexistence of ferroelectric and relaxor properties in epitaxial films of Ba1-xSrxTiO3,
Physical Review B 70 (2004) 132105/1-4.
M. Tyunina, J. Levoska,
Dielectric nonlinearity in
relaxor and ferroelectric thin films of chemically ordered PbSc0.5Nb0.5O3,
Applied Physics Letters 85 (2004) 4720-4722.
A.E. Pap, K. Kordás, S. Leppävuori,
Thermal oxidation of porous silicon; Study on reaction kinetics, Journal of
Physical Chemistry B 108 (2004)12744-12747
K.S.K. Yeo, M.J. Lancaster, B. Su, T.W. Button, M. Kittilä, J. Hagberg, S.
Leppävuori,
High frequency thick film BST ferroelectric phase shifter, Integrated
Ferroelectrics 61 (2004) 65-70.
PAPERS
M. Pudas, J. Hagberg,
The Absorption ink transfer mechanism of gravure offset printing for
electronic circuitry, IEEE Transactions on Electronics Packaging
Manufacturing 25, No 4, 335-342.
M. Tyunina, J. Levoska, S. Leppävuori,
Relaxor ferroelectric thin-film heterostructures: scaling of dielectric
properties, Journal of Materials Science: Materials in Electronics 14 (2003)
369-374.
T. Hu, H. Jantunen, A. Uusimäki, S. Leppävuori, Ba0.7Sr0.3TiO3 powders with
B2O3 additive prepared by the sol-gel method for use as microwave material,
Materials Science in Semiconductor Processing 5 (2003) 215-221.
H. Jantunen, T. Kangasvieri, J. Vähäkangas, S. Leppävuori,
Design aspects of microwave components with LTCC technique, Journal of the
European Ceramic Society 23 (2003) 2541-2548.
A.E. Pap, K. Kordás, H. Jantunen, S. Leppävuori,
Copper plating on and electrical investigation of a low-permittivity
cycloolefin-copolymer, Polymer Testing, 22
(2003) 657-661.
J. Levoska, M. Tyunina,
Chemical ordering and epitaxy in relaxor and ferroelectric PbSc0.5Nb0.5O3
thin films, Ferroelectrics 291 (2003) 11-18.
M. Tyunina, J. Levoska,
Glassy state in relaxor ferroelectric thin films,
Ferroelectrics 291 (2003) 93-99.
M. Huotari, M. Jaskari, E. Annila, V. Lantto,
Responses of olfactory receptor neurons of the large pine weevil to a
possible deterrent neutroil and two other chemicals, Silva Fennica 37 (1)
(2003) 149-156.
N.N. Toan,
Gas sensing with semiconducting perovskite oxide LaFeO3, Physica B 327
(2003) 279-282.
S. Saukko, V. Lantto,
Influence of electrode material on properties of SnO2-based gas sensor, Thin
Solid Films 436 (2003) 137-140.
J. Frantti, S. Eriksson, S. Hull, V. Lantto, H. Rundlöf, M. Kakihana,
Composition variation and the monoclinic phase within Pb(ZrxTi1-x)O3
ceramics, J. Phys.: Condens. Matter 15 (2003) 6031-6041.
P. Hyvönen, V. Lantto, P. Jalovaara,
Local pressures in the subacromial space, International Orthopedics (SICOT)
27 (2003) 373-377.
A. Sternberg, L. Shebanovs, V. Zauls, K. Kundzins, M. Antonova, M. Livins,
L. Cakare, M. Tyunina, J. Levoska, I. Aulika,
Structure and properties of Pb(LuNb)O3-PbTiO3 ceramics and thin films,
Ferroelectrics 294 (2003) 41-47.
K.
Kordás, A.E. Pap and
Laser-enhanced selective TiO2 deposition on Si, Surface and
Coatings Technology, 176 (2003) 84-87.
A. Kruusing, Erratum to "Optimizing
magnetization orientation of permanent magnets for maximal gradient force"
[J. Magn. Magn. Mater. 234 (2001) 545-555]. Journal of Magnetism and
Magnetic Materials, vol. 263, 2003, issues 1-2, p. 243.
J. Lappalainen, J. Frantti, V. Lantto,
A chapter “Laser-assisted Growth and Characterization of Multicomponent
Lead-Zirconate-Titanate Films” to the book “Crystal Growth Technology”
(edited by K. Byrappa and T. Ohachi), William Andrew publishing - Noyes
Publications, 2003,143-176.
PAPERS
M. Tyunina, J. Levoska,
Dynamic nonlinear dielectric response of relaxor ferroelectric
(PbMg1/3Nb2/3O3)0.68-(PbTiO3)0.32 thin films,
Physical Review B 65 (2002) 132101-1-4.
J. Hagberg, M. Pudas, S. Leppävuori, K. Elsey, A. Logan,
Developing gravure offset printing, OnBoard Technology February 2002, 38-40.
H. Jantunen, A. Uusimäki, R. Rautioaho, S. Leppävuori,
Temperature coefficient of microwave resonance frequency of a
low-temperature cofired ceramic (LTCC) system, the Journal of the American
Ceramic Society, 85 (2002) 697-699.
H. Jantunen, A. Uusimäki, S. Leppävuori, R. Rautioaho Effect of
processing route on thermomechanical properties of low temperature firing
ceramic for electronic packaging, British Ceramic Transactions, 101 (2002)
22-24.
M. Tyunina, J. Levoska, S. Leppävuori,
Relaxor and normal ferroelectric behavior in ordered thin films of
PbSc0.5Nb0.5O3, Journal of Applied Physics, 91 (2002) 9277-9287.
K. Kordás, J. Békési, R. Vajtai, M. Jauhianen, J. Remes, A. Uusimäki, S.
Leppävuori, Thomas F. George and L. Nánai,
Laser-assisted via hole metallization in PCB materials, Journal of
Electronic Materials, 30 (2001) L21-L24.
R. Vajtai, K. Kordás, B.Q. Wei, J. Békési, S. Leppävuori, T. F. George, P.M.
Ajayan,
Carbon nanotube network growth on palladium seeds, Materials Science and
Engineering, C 19 (2002) 271-274.
K. Kordás, S. Leppävuori, J. Békési, L. Nánai, J. Remes, R. Vajtai, S.
Szatmári,
Nickel deposition on porous silicon utilizing lasers, Applied Surface
Science, 186 (2002) 232-236.
H. Jantunen, S. Leppävuori, A. Turunen and A. Uusimäki,
Multilayer resonators and a bandpass filter fabricated from a novel
low-temperature co-fired ceramic, Journal of Electronic Materials, 31 (2002)
191-195.
M. Tyunina, J. Levoska, S. Leppävuori, V. Zauls, K. Kundzinsh, M. Kundzinsh,
Dielectric anomalies in relaxor ferroelectric thin films,
Ferroelectrics, 270 (2002) 235-240.
J. Lappalainen, S. A. Ivanov, V. Lantto, J. Frantti,
Grain growth and orientation of nanocrystalline laser-deposited
Pb0.97Nd0.02(Zr0.55Ti0.45)O3 thin films, Ferroelectrics, 269 (2002) 333-338.
M. Tyunina, V. Zauls, K. Kundzinsh, J. Levoska,
Dielectric Fourier-spectroscopy in relaxor and normal ferroelectric thin
films, Ferroelectrics, 270 (2002) 241-246.
J. Levoska, M. Tyunina, A. Sternberg, S. Leppävuori,
Epitaxy and B-site ordering in thin film heterostructures of relaxor
ferroelectric perovskites, Ferroelectrics, 271(2002)137-
142.
K. Kordás, A.E. Pap, V. Lyöri, A. Uusimäki, J. Vähäkangas, S. Leppävuori
Mirror fabrication on optical fibres using maskless excimer laser-assisted
methods, Surface and Coatings Technology 155
(2002) 285-288.
J. Frantti, S. Ivanov, J. Lappalainen, S. Eriksson, V. Lantto, S. Nishio, M.
Kakihana and H. Rundlöf,
Local and average structure of lead titanate based ceramics, Ferroelectrics,
266 (2002) 73-90.
A.E. Pap, K. Kordás, R. Peura, S. Leppävuori,
Simultaneous chemical silver and palladium deposition on porous silicon;
FESEM, TEM, EDX and XRD investigation, Applied Surface Science 201 (2002)
56-60.
J. Lappalainen, S.A. Ivanov, V. Lantto,
Secondary grain growth and surface morphology of post-annealed
nanocrystalline Pb0.97Nd0.02(Zr0.55Ti0.45)O3 thin films, Journal of Applied
Physics, 92 (2002) 6153-6159.
J. Frantti, S. Ivanov, S. Eriksson, J. Lappalainen, V. Lantto, M. Kakihana,
H. Rundlöf,
Neutron diffraction and bond-valence calculation studies of Pb(ZrxTi1-x)O3
ceramics, Ferroelectrics, 272 (2002) 51-56.
J. Frantti, S. Ivanov, S. Eriksson, H. Rundlöf, V. Lantto, J. Lappalainen,
M. Kakihana,
Phase transitions of Pb(ZrxTi1-x)O3 ceramics, Physical Review B 66 (2002)
064108-1-15.
V. Brinzari, G. Korotcenkov, V. Golovanov, J. Schwank, V. Lantto, S. Saukko,
Morphological rank of nano-scale thin dioxide films deposited by spray
pyrolysis from SnCl45H2O water solution, Thin Solid films 408 (2002) 51-58.
A. Kruusing, Actuators with
permanent magnets having variable in space orientation of magnetization.
Sensors and Actuators: A. Physical, vol. 101, 2002, nos. 1-2, p. 168-174.
L. Nánai, K. Kordás, S. Leppävuori, T.F. George,
Chemistry of materials metallization, Chapter in Book of Modern Topics In
Chemical Physics, Editors: Thomas F. George, Xin Sun, Guoping Zhang, (2002)
287-301
PAPERS
M.
Tyunina, J. Levoska, S. Leppävuori,
Dielectric nonlinearities in ferroelectric thin-film
heterostructures, Applied Physics Letters, 78 (2001) 527-529.
U.
Pulkkinen, T. T. Rantala, T.S. Rantala, V. Lantto,
Kinetic Monte Carlo simulation of oxygen exchange of SnO2 surface, Journal
of Molecular Catalysis, Ai Chemical, 166 (2001) 15-21.
K.
Kordás, S. Leppävuori, A. Uusimäki, Thomas F. George, L. Nánai, R. Vajtai,
K. Bali, J. Békési,
Palladium thin film deposition on polyimide by CW Ar+ laser radiation for
electroless copper plating, Thin Solid Films 384 (2001) 185-188.
K.
Kordás, J. Békési, R. Vajtai, L. Nánai, S. Leppävuori,
A.Uusimäki, K. Bali, Thomas F. George, G. Galbács, F. Ignácz, P. Moilanen,
Laser-assisted metal deposition from liquid-phase precursors on polymers,
Applied Surface Science 172 (2001)178-189.
K.
Kordás, J. Remes, S. Beke, T. Hu, S. Leppävuori,
Manufacturing of porous silicon; porosity and thickness dependence on
electrolyte composition, Applied Surface Science 178 (2001) 190-193.
K.
Kordás, J. Remes, S. Leppävuori, L. Nánai
Laser-assisted selective deposition of nickel patterns on porous silicon
substrates, Applied Surface Science 178 (2001) 93-97.
M.
Tyunina, J. Levoska,
Dielectric anomalies in epitaxial films of relaxor ferroelectric
(PbMg1/3Nb2/3O3)0.68-(PbTiO3)0.32, Physical Review B 63 (2001) 224102-1-8.
H.
Moilanen,
Laser interferometric measurement of displacement-field characteristics of
piezoelectric actuators and actuator materials,
Sensors and Actuators A 92 (2001) 326-334.
J.
Lappalainen, V. Lantto, J. Frantti, S. A. Ivanov,
Optical properties and surface morphology of pulsed-laser-deposited
polycrystalline PNZT thin films,
Journal of the European Ceramic Society 21 (2001) 1585-1588.
Markku Lahti, Vilho Lantto,
Passive RF band-pass filters in an LTCC module made by fine-line thick-film
pastes, Journal of the European Ceramic Society 21 (2001) 1997-2000.
Vilho Lantto, Tapio T. Rantala, Tuomo S. Rantala,
Atomistic understanding of semiconductor gas sensors, Journal of the
European Ceramic Society 21 (2001) 1961-1965.
J.
Hagberg, M. Pudas, S. Leppävuori, K. Elsey, A. Logan,
Gravure offset printing development for fine line thick film circuits,
Microelectronics International, 18 (2001) 32-35.
J.
Frantti, J. Lappalainen, V. Lantto,
Comment on “Monoclinic phase of Pb(Zr0,52, Ti0,48)O3 ceramics: Raman and
phenomenological thermodynamic studies”, Physical Review B, 63
(2001)176102-3.
R.
Rautioaho, O. Nousiainen, S. Leppävuori, J. Lenkkeri, T. Jaakola,
Thermal fatigue in solder joints of Ag-Pd- and Ag-Pt metallized LTCC
modules, Microelectronics Reliability 41 (2001) 1643-1648.
J.
Levoska, M. Tyunina, A. Sternberg, S.Leppävuori,
Structure and properties of epitaxial ferroelectric PbLu0.5Nb0.5O3 thin
films, Ferroelectrics 258(2001) 231-240.
M.
Tyunina, J. Levoska, A. Sternberg, S.Leppävuori,
Phase transitions in epitaxial films of relaxor ferroelectric binary systems
near the morphotropic phase boundary, Ferroelectrics 258(2001) 265-270.
J.
Mizsei, J. Voutilainen, S. Saukko, V. Lantto, Structural transformations of
ultra-thin sputtered Pd activator layers on glass and SnO2 surfaces, Thin
Solid Films, 391 (2001) 209-215.
J.L. Solis, S. Saukko, L.B. Kish, C.G. Granqvist and V. Lantto,
Nanocrystalline tungsten oxide thick films with high sensitivity to H2S at
room temperature, Sensors and Actuators B, 77 (2001) 316-321.
J.
Mizsei and V. Lantto,
In situ AFM, XRD anf resistivity studies of the agglomeration of sputtered
silver nanolayers, Journal of Nanoparticle Research, 3 (2001) 271-278.
J.L. Solis, L.B. Kish, R. Vajtai, C.G. Granqvist, J. Olsson, J. Schnürer and
V. Lantto,
Identifying natural and artificial odours through noise analysis with a
sampling-and-hold electron nose, Sensors and Actuators B, 77 (2001) 312-315.
J.L. Solis, S. Saukko, L. Kish, C.G. Granqvist and V. Lantto,
Semiconductor gas sensors based on nanostructured tungsten oxide, Thin Solid
Films, 391 (2001) 255-260.
Jose L. Solis, Anders Hoel, Lazslo B. Kish, Claes G. Granqvist, Sami Saukko
and Vilho Lantto,
Gas sensing properties of nanocrystalline WO3 films made by advanced
reactive gas deposition, J. Am. Ceram. Soc., 84 (2001) 1504-1508.
J.L. Solis, A. Hoel, V. Lantto and C.G. Granqvist, Infrared spectroscopy
study of electrochromic nanocrystalline tungsten oxide films made by
reactive advanced gas deposition, Journal of Applied Physics, 89 (2001)
2727-2732.
A. Kruusing, Optimizing
magnetization orientation of permanent magnets for maximal gradient force.
Journal of Magnetism and Magnetic Materials, vol. 234, 2001, no. 3, p.
545-555.
PAPERS
J.
Levoska, M. Tyunina, A. Sternberg, S. Leppävuori,
Structural characterization of relaxor ferroelectric PbMg 1/3Nb 2/3O3-PbTiO3
thin film heterostructures deposited by pulsed laser ablation,
Applied Physics A 70 (2000) 269-274.
M.
Tyunina, S. Leppävuori,
Effects of laser fluence, size and shape of the laser focal spot in pulsed
laser deposition using a multielemental target, Journal of
Applied Physics 87 (2000) 8132-8142.
J.
Lappalainen, V. Lantto,
Composition and phase structure in laser deposited and post-annealed
Pb1-3y/2Ndy(ZrxTi1-x)O3 thin films, Applied Surface Science 154-155 (2000)
118-122.
K.J. Koivusaari, T.T. Rantala, J. Levoska, S. Leppävuori,
Surface electronic density of states of tetrahedral amorphous carbon
investigated by scanning tunnelling spectroscopy and ab initio calculations,
Applied Physics Letters 76 (2000) 2794-2796.
F.
Davanloo, C.B. Collins, K.J. Koivusaari, S. Leppävuori,
Amorphic diamond/silicon semiconductor heterojunctions exhibiting
photoconductive characteristics, Applied Physics Letters 77, 12, 18
September 2000, 1837-1839.
Dewei Tian, R. Rautioaho, A. Uusimäki, S. Leppävuori, T. Kutilainen,
X-ray non-destructive test: Meet the challenges of examining PCBs and LTCC
substrates, Advancing Microelecctronics, 27, No. 3, May/June 2000, 21-23.
K.
J. Koivusaari, Tapio T. Rantala, S. Leppävuori,
Calculated electronic density of states and structural properties of
terahedral amorphous carbon, Diamond and Related Materials 9 (2000) 736-740.
M.
Tyunina, J. Levoska, S. Leppävuori, R. Shorubalko, A. Sternberg,
Pulsed laser deposition of relaxor-based PbLu 0.5Nb 0.5O3-PbTiO3 thin
films, Journal of Applied Physics, 88 (2000) 4274-4281.
K.
Kordás, K.
Laser direct writing of copper on polyimide surfaces from solution, Applied
Surface Science 154-155 (2000) 399-404.
K.
Kordás, L. Nánai, G. Galbács, A. Uusimäki, Leppävuori, K.Bali,
Reaction Dynamics of CW Ar+ laser induced copper direct writing from liquid
electrolyte on polyimide substrates, Applied Surface Science 158 (2000)
127-133.
J.
Mizsei, L. Pirttiaho, M. Karppinen,
V. Lantto,
Nanocatalyst sensitizers by agglomeration of nanofilms, Sensors and
Actuators B 65 (2000) 195-198.
T.
S. Rantala, T. T. Rantala and V. Lantto,
Computational studies for the interpretation of gas response of SnO2 (110)
surface, Sensors and Actuators B 65 (2000) 375-378.
Dewei Tian, R. Rautioaho, S. Leppävuori,
A method of distinguishing the level of features in projected x-ray images:
application to multilayer printed circuit boards, Meas. Sci. Technol. 11
(2000) 1364-1368.
S.
Leppävuori, A. Uusimäki,
Use of gravure offset printing in manufacturing of electronic applications,
Book of Electronic Packaging for High Reliability; Low Cost Electronics,
edited by Rao Tummala, Marija Kosec, W. Kinzy Jones and Darko Belavic, 1999,
157-160.
J.
Frantti, J. Lappalainen, S. Eriksson, V. Lantto, S. Nishio, M. Kakihana, S.
Ivanov, H. Rundlöf,
Neutron Diffraction Studies of Pb(ZrxTi1-x)O3 Ceramics, Jpn. J. Appl.Phys.
Vol. 39 (2000), 5697-5703.
J.L
Solis, V. Lantto, L. Häggström, B. Kalska, J. Frantti, S.Saukko,
Synthesis of new compound semiconductors in the Sn-W-O system for
gas-sensing studies, Sensors and Actuators B 68 (2000) 286-292.
A.
Kruusing, T. Thelemann, H. Thust, S. Leppävuori, K.-H. Drüe,
Heat transfer enhancement at solid-liquid and solid-gas interfaces by
near-surface coolant agitation, IEEE Transactions on Componets and Packaging
Technologies, 23, No 3, September 2000, 548-554.
A.Kruusing,
Analysis and optimization of loaded cantilever beam microactuators. Smart
Materials and Structures, 9 (2000)
186-196.
K.
Kordás, J. Békési, R. Vajtai, L. Nánai, S.Leppävuori, A.Uusimäki, K. Bali,
Thomas F. George, G. Galbács,
Laser-assisted metal deposition from liquid-phase precursors on polymers,
Applied Surface Science 6714 (2000) 1-12.
K.
Kordás, L. Nánai, K. Bali, K. Stépán, R. Vajtai, Thomas F. George, S.
Leppävuori,
Palladium thin film deposition from liquid precursors on polymers by
projected excimer beams, Applied Surface Science 168 (2000) 67-79.
H.
Jantunen, R. Rautioaho, A. Uusimäki, S. Leppävuori,
Compositions of MgTiO3 - CaTiO3 ceramic with two borosilicate glasses for
LTCC technology, Journal of the European Ceramic Society 20 (2000)
2331-2336.
H.
Jantunen, R. Rautioaho, A. Uusimäki, S. Leppävuori,
Preparing low-loss low-temperature cofired ceramic material without glass
addition, Journal of the American Ceramic Society 83 (11) 2855-57 (2000).
R.
Rautioaho, O. Nousiainen, T. Saven, S. Leppävuori, J. Lenkkeri,
Thermal fatique and metallurgical reactions in solder joins of LTCC
modules, Microelectronics Reliability 40 (2000) 1527-1532.
M.
Lahti, V. Lantto, S. Leppävuori,
Planar inductors on an LTCC substrate realized by the
gravure-offset-printing technique, IEEE Transactions on Components and
Packaging Technologies, 23, No. 4, December 2000, 606-610.
J.T. Korpelainen, V.V. Myllylä, V. Kampman, S. Leppävuori,
A novel accelerometry-based method for the quantification of balance and
postural sway, JAGS June 2000-Vol. 48, 6, 709-710.
T.T. Rantala, T.S. Rantala, V. Lantto,
Electronic structure of SnO2(110) surface, Materials Science in
Semiconductor Processing, 3 (2000) 103-107.
V.
Lantto, T.S. Rantala, T.T. Rantala,
Experimental and theoretical studies on the receptor and transducer
functions of SnO2 gas sensors, Electron Technology, 33 (1/2) (2000)
22-30.
PAPERS
S.
Leppävuori, J. Remes, H. Moilanen,
Utilization of Cu(hfac)tmvs precursor gas in LCVD integrated circuit repair
system, Applied Surface Science 138-139 (1999) 123-129.
J.
Remes, H. Moilanen, S. Leppävuori,
Enhancing IC repairs by combining laser direct-writing of Cu and FIB
techniques, Microelectronics Reliability 39 (1999) 997-1001.
K.J. Koivusaari, J. Levoska, S. Leppävuori,
Pulsed laser deposition of diamond-like carbon: relations between laser
fluence, velocity of carbon ions, and bonding in the films, Journal of
Applied Physics. 85 (1999) 2915-2920.
E.
Jakku, J. Hagberg, M. Rytivaara, S. Leppävuori,
The Use of New Stripline Structures in the Design of HTS Microwave
Filters, International Journal of Modern Physics B, 12, Nos. 29, 30 & 31
(1998) 3284-3287.
J.
Levoska, M. Tyunina, S. Leppävuori,
Laser ablation deposition of silicon nanostructures, NanoStructured
Materials 12 (1999) 101-106.
M.
Tyunina, J. Levoska, K. J. Koivusaari, S. Leppävuori,
Agglomeration and surface morphology during pulsed laser deposition of
Pb-Zr-Ti-O, NanoStructured Materials 12 (1999) 263-266.
M.
Tyunina, J. Wittborn, J. Levoska , A. Sternberg, K.V. Rao,
Domain configuration in pulsed laser deposited films of rhombohedral
PbZr0.65Ti0.35O3, Appl. Phys. Lett. 74 (1999) 3191-3193.
M.
Tyunina, J. Levoska, S. Leppävuori,
Sorption in pulsed laser deposition of multicomponent materials: Experiment
versus modeling, Journal of Applied Physics 86 (1999) 2901-2908.
T.
Thärigen, G. Lippold, V. Riede, M. Lorenz, K. J. Koivusaari, D. Lorenz, S.
Mosch, P. Grau, R. Hesse, P. Streubel, R. Szargan,
Hard amorphous CsixNy thin films deposited by RF nitrogen plasma assisted
pulsed laser ablation of mixed graphite/Si3N4-targets, Thin Solid Films 348
(1999) 103-113.
M.
Tyunina, J. Levoska , A. Sternberg, S. Leppävuori,
Dielectric properties of pulsed laser deposited films of
PbMg1/3Nb2/3O3-PbTiO3 and PbSc1/2Nb1/2O3-PbTiO3 relaxor ferroelectrics,
Journal of Applied Physics 86 (1999) 5179-5184.
J.Lappalainen, J. Frantti and V. Lantto,
Surface structure and particulate generation in Pb0.97Nd0.02(Zr0.55Ti0.45)O3
ablation targets during pulsed laser deposition, Journal of American Ceramic
Society 82 889-96 (1999).
T.T. Rantala, T.S. Rantala, V. Lantto,
Surface relaxation of the (110) face of rutile SnO2, Surface Science,
420,103-109 (1999).
J.
Lappalainen, J. Frantti and V. Lantto,
Effect of laser-ablation process parameters and post-annealing treatment on
ferroelectric PZT thin films, Applied Surface Science 142 (1999) 407-412.
M.
Lahti, S. Leppävuori and V. Lantto,
Gravure-offset-printing technique for the fabrication of solid films,
Applied Surface Science 142 (1999) 367-370.
J.L. Solis, J. Frantti, V. Lantto, L. Häggström and M.Wikner,
Structure characterization of semiconducting mixed oxides of tin and
tungsten, Physica Scripta T79, 216-219 (1999).
J.
Lappalainen, V. Lantto,
Extrinsic conductivity in ferroelectric PZT film capacitors made by laser
ablation deposition, Physica Scripta T79, 220-224, 1999.
J.
Frantti, V. Lantto, S. Nishio, M. Kakihana,
Effect of A- and B-cation substitutions on the phase stability of
PbTiO3 ceramics, Physical Review B, Volume 59, Number 1, 1 January
1999-I, 12-15.
J.
Frantti, J. Lappalainen, V. Lantto, S. Nishio and M. Kakihana,
Low-temperature raman studies of Pb(ZrxTi1-x)O3 and Pb1-3y/2 NdyTiO3
ceramics, Jpn. J. Appl. Phys. 38 (1999) 5679-5682.
K.
Kordás, J. Békési, K. Bali, R. Vajtai, L. Nánai, Thomas F. George, S.
Leppävuori,
Ultraviolet laser-induced liquid-phase palladium seeding on polymers,
J.Mater.Res.14, Sep 1999, 3690-3694.
F.
Davanloo, C.B. Collins, K.J. Koivusaari,
Scratch adhesion testing of nanophase diamond coatings on steel and carbides
substrates, J. Mater.Res., 14, Aug 1999, 3474-3482.
A.
Kruusing, S. Leppävuori, A. Uusimäki, B. Petretis, O. Makarova,
Micromachining of magnetic materials, Sensors and Actuators 74 (1999) 45-51.
K.
Kórdas, K. Bali, S. Leppävuori, A. Uusimäki, L. Nánai,
Laser direct writing of palladium on PI surfaces from solution, Applied
Surface Science 52 (1999) 149-155.
A.
Kruusing, S. Leppävuori, A. Uusimäki,
Printed solenoid windings for miniature electromagnetic devices, J.
Micromech. Microeng. 9 (1999) 166-169.
S.
Leppävuori, A. Kruusing, A. Uusimäki,
Non-planar piezoelectric film structures, Ferroelectrics 232 (1999) 153-158.
A.
Kruusing,
Nd-Fe-B films and microstructures,
International Materials Reviews 44 (1999) 121-140.
T.
Thärigen, M. Lorenz, K. J. Koivusaari, P. Streubel, R. Hesse, R. Szargan,
Adjusting chemical bonding of hard amorphous CSixNy thin films by
N*-plasma-assisted pulsed laser deposition, Appl. Phys. A 69, S899-S903
(1999).
PAPERS
E.
Kemppinen, P. Mikkonen, Paul E. Collander, S. Leppävuori,
Performance of Cu and Ag-based microstrips up to millimetre wave
frequencies, Microelectronics International, 15/2 (1998) 11-15.
A.
Lozinski, Fan Wang, A. Uusimäki, S. Leppävuori,
Thick-film pyroelectric linear array, Sensors and Actuators, A 68 (1998)
290-293.
M.
Tyunina, J. Levoska, S. Leppävuori,
Experimental studies and modeling of Pb-Zr-Ti-O film growth in pulsed laser
deposition, Journal of Applied Physics, 83 (1998)
5489-5496.
A.
Sternberg, M. Tyunina, M. Kundzinsh, V. Zauls, M. Ozolinsh, K. Kundzinsh, I.
Shorubalko, M. Kosec, L. Calzada, L. Pardo, R. Kullmer, D. Bäuerle, J.
Levoska, S. Leppävuori, T. Murtoniemi,
Composition-structure-properties correlation in ferroelectric thin films,
Journal of the Korean Physical Society, 32 (1998) S1365-S1368.
J.
Frantti , V. Lantto,
Anharmonicity of the potential of the A1(1TO)-mode vibrations in PZT
ceramics, Journal of the Korean Physical Society, 32 (1998) S503-S505.
J.
Lappalainen, J. Frantti, V. Lantto,
Particulate formation in PZT thin films during pulsed laser ablation
deposition, Journal of the Korean Physical Society, 32 (1998) S1183-S1186.
F.
Wang, A. Uusimäki, S. Leppävuori, S.F. Karmanenko, A.I. Dedyk, V.I.
Sakharov, I.T. Serenkov,
Ba0.7Sr0.3TiO3 ferroelectric film prepared with the sol-gel process and its
dielectric performance in planar capacitor structure, Journal of Materials
Research,13 (1998)1243-1248 .
L. Nánai, R.
Vajtai, Cs. Beleznai, J.
Remes, S. Leppävuori, T.F. George,
Structural changes in GaAs induced by ultrafast (fs) laser pulses, Journal
of Materials Research, 13 (1998) 1808-1811.
I.
B. Vendik, S. A. Gal’chenko, M. N. Gubina, V. V. Kondrat’ev, S. Leppävuori,
E. Jakku,
Nonlinear characteristics of resonators and filters made from
high-temperature superconducting films, Technical Physics Letters, 24 (12),
December 1998, 956-958.
I.
B. Vendik, V. V. Kondrat’ev, A. A. Svishchev, S. Leppävuori, E. Jakku,
Band-pass microstripe filters using high-temperature superconducting films,
Technical Physics Letters, 24 (12), December 1998, 968-969.
J.L. Solis and V. Lantto,
Gas-sensing properties of SnxWO3+x mixed oxide thick films, Sensors and
Actuators B, 48 (1998), 322-327.
J.L. Solis, J. Frantti, V. Lantto, L. Häggström and M. Wikner,
Characterization of phase structures in semiconducting SnWO4 powders by
Mössbauer and Raman spectroscopies, Physical Review B, 57 (1998),
13491-13500.
J.
Mizsei, P. Sipilä and V. Lantto,
Structural studies of sputtered noble metal catalysts on oxide surfaces,
Sensors and Actuators B, 47 (1998), 139-144.
T.S. Rantala, V. Lantto and T.T. Rantala,
Computational approaches to the chemical sensitivity of semiconducting tin
dioxide, Sensors and Actuators B, 47 (1998) 59-64.
J.
Frantti, V. Lantto and M. Kakihana,
Raman scattering studies of Pb(ZrxTi1-x)O3 and Pb1-3y/2 Ndy(ZrxTi1-x)O3
ceramics with UV and visible laser lights, Jpn. J.Appl. Phys. 37
(1998), 5406-5409.
M.
Tyunina, J. Levoska , A. Sternberg, V. Zauls, M. Kundzinsh, I. Shorubalko,
S. Leppävuori,
Pulsed laser deposition of relaxor ferroelectric films, Journal de Physique
IV, 8 (1998) Pr9-261-264.
A.I. Dedyk, S.F. Karmanenko, S. Leppävuori, V.I. Sakharov, A.A. Semenov,
I.T. Serenkov, L.T. Ter-Martirosyan, A. Uusimäki, F. Wang,
Influence of layer interface parameters on dielectric characteristics of
BSTO ferroelectric film planar capacitors, Journal de Physique IV, 8 (1998)
Pr9-217-220.
M.
Tyunina, J. Levoska, A. Sternberg, S. Leppävuori,
Relaxor behavior of pulsed laser deposited ferroelectric
(Pb1-xLax)(Zr0.65Ti0.35)O3 films, Journal of Applied Physics, 84 (1998)
6800-6810.